You are here: Homepage » Our Products » Freezer Rooms

Freezer Rooms

technickon ltd design and build customised freezer rooms. These facilities are typically designed to operate between temperatures of 0°C to -20°C. Where required, a special room air mixing system can be installed that can typically achieve a single point temperature control of +/- 1°C.

Almost any combination of visual and audible devices can be integrated into the control system for display, monitoring and recording of any system parameter, while text message alarm systems can be integrated into the control strategy, for immediately informing staff direct to their mobile phones if critical parameter excursions or plant faults occur.

Structures typically use pre-manufactured plastic coated steel faced rigid polyurethane foam cored panels with thermal breaks for the walls, ceilings and doors and insulated floors. We can also install sealed easy-clean coving if required. Double or triple glazed observation ports can be installed. These structures are hermetically sealed using a variety of modern polymer sealants, depending on product sensitivity. Finishes and seals are hygienic, easy clean and resistant to most common sterilants and fumigants.

Freezer rooms are constructed with an insulated floor complete with load-spreading aluminum chequer plate flooring and trolley access ramps.

We can supply internal storage racking in a wide variety of sizes, configurations and materials depending on your requirements.

Lighting and power requirements can be provided to suit the desired arrangement.

Features Include:

Modular construction using Polyurethane foam panel system for maximum insulation and cleanliness (alternative core materials can also be supplied)
Duty and Standby systems for automatic change over on refrigeration plant failure or to allow replacement of system components whilst still maintaining environmental control
Panic alarms integrated into the system for staff working inside the room
Control of lighting intensity and operational periods
All electrical installations are designed and installed to comply fully with current IEE regulations
Dedicated project management and lifetime aftercare support
Documented systematic commissioning, testing and validation procedures
Recalibration and revalidation services after initial installation
Custom designed and built to meet your specification

Typical applications for Walk in freezer rooms:

Pharmaceutical cold pack storage for product transport protection
Environmental monitoring
Large scale product freezing
Environmental testing
Stability trials
Product storage

Optional equipment can include:

Duty and standby systems
Logging and alarm systems
Internal racking – stainless steel or chrome
Internal structures
Mixer fans

technickon can develop a bespoke solution to suit your precise requirements.

Downloads:

Product Info for Walk In Freezer Room