You are here: Homepage » Our Products » Warm Rooms

Warm Rooms

technickon design and build customised walk in warm rooms. These facilities are typically designed to operate between temperatures of 10°C to 25°C and we can easily achieve temperature single point control of +/-3°C. Where required, a special room air mixing system and upgraded controls can be installed that can typically achieve temperature single point control of +/- 0.5°C.

Almost any combination of visual and audible devices can be integrated into the control system for display / monitoring / recording of any system parameter, while text message alarm systems can be integrated into the control strategy, for immediately informing staff direct to their mobile phones if critical parameter excursions or plant faults occur.

Structures typically use pre-manufactured plastic coated steel faced rigid polyurethane foam cored panels with thermal breaks for the walls, ceilings and doors and sometimes floors. We can also install sealed easy-clean coving if required. Double or triple glazed observation ports with or without blinds can be installed. These structures are hermetically sealed using a variety of modern polymer sealants, depending on product sensitivity. Finishes and seals are hygienic, easy clean and resistant to most common sterilants and fumigants.

Walk in warm rooms can be constructed with an insulated floor complete with check plate flooring and access ramps.

We can supply internal racking in a wide variety of sizes, configurations and materials depending on client requirements.

Lighting and power requirements can be provided to suit the desired arrangement.

Features Include:

Modular construction using a proven Polyurethane foam panel system for maximum insulation and cleanliness
Duty and Standby systems for automatic change over on chiller failure or to allow replacement of system components whilst still maintaining environmental control
Panic alarms integrated into the system for staff working inside the room
Control of lighting intensity and operational periods
All electrical installations are designed and installed to comply fully with current IEE regulations
Dedicated project management and lifetime aftercare support
Documented systematic commissioning, testing and validation procedures
Recalibration and revalidation service after initial installation
Custom designed and built to meet or exceed your specification

Typical applications for walk in warm rooms:

Pharmaceutical storage
Environmental monitoring and testing
Environmental testing rooms
Stability trials for pharmaceutical product
Pharmaceutical walk in warm rooms
Warm storage in a factory for delicate product
Athlete training rooms

Optional equipment can include:

Duty and standby systems
Logging and alarm systems

technickon can develop a system to suit your precise requirements.

Downloads:

Product Info for Walk In Warm Rooms